Base I/O Unit Connection; Base I/O Unit Outline - Mitsubishi Electric MELDASMAGIC64 Connection Manual

5. Base I/O Unit (FCU6-DX2**/3**/4**) Connection

5.1 Base I/O Unit Outline

The base I/O unit is used in the connection of the machine input/output (DI/DO), servo drive unit,
spindle encoder, skip and remote I/O unit. There must be one base I/O unit for each NC Card.
Depending on the base I/O unit type, connection is possible with analog input, analog output and a
manual pulse generator.
The following shows a list of base I/O units and add-on PCBs.
Name Type
Base I/O FCU6-DX210 DI (sink/source)/DO (sink)=48/48
unit
FCU6-DX211 DI (sink/source)/DO (source)=48/48
FCU6-DX220 DI (sink/source)/DO (sink)=64/64
FCU6-DX221 DI (sink/source)/DO (source)=64/64
FCU6-DX310 DI (sink/source)/DO (sink)=80/64
FCU6-DX311 DI (sink/source)/DO (source)=80/64
FCU6-DX410 DI (sink/source)/DO (sink)=96/80
FCU6-DX411 DI (sink/source)/DO (source)=96/80
FCU6-DX320 DI (sink/source)/DO (sink)=80/64
FCU6-DX321 DI (sink/source)/DO (source)=80/64
FCU6-DX420 DI (sink/source)/DO (sink)=96/80
FCU6-DX421 DI (sink/source)/DO (source)=96/80
FCU6-DX330 DI (sink/source)/DO (sink)=48/48
FCU6-DX331 DI (sink/source)/DO (source)=48/48
FCU6-DX430 DI (sink/source)/DO (sink)=64/64
FCU6-DX431 DI (sink/source)/DO (source)=64/64
FCU6-DX340 DI (sink/source)/DO (sink)=48/48
FCU6-DX341 DI (sink/source)/DO (source)=48/48
FCU6-DX440 DI (sink/source)/DO (sink)=64/64
FCU6-DX441 DI (sink/source)/DO (source)=64/64
Add-on RX323-1
PCB
RX323
RX324-1
RX324
RX331
RX341
(Note) Refer to "7. Remote I/O Unit Connection" for add-on PCB connections.
5. Base I/O Unit (FCU6-DX2**/3**/4**) Connection
5.1 Base I/O Unit Outline
No. of machine input/
output points
DI (sink/source)/DO (sink)=32/16
DI (sink/source)/DO (sink)=32/16
DI (sink/source)/DO (source)=32/16 None
DI (sink/source)/DO (source)=32/16 Analog output 1 point
None
None
SV1, SV2, ENC1, SKIP, RIO1, RIO2,
CR31 (for add-on PCB)
SV1, SV2, ENC1, SKIP, RIO1, RIO2
Add-on PCB: RX323-1
SV1, SV2, ENC1, SKIP, RIO1, RIO2,
Analog output 1 point
Add-on PCB: RX323
SV1, SV2, ENC1, SKIP, RIO1, RIO2,
HANDLE2ch
Add-on PCB: RX331
SV1, SV2, ENC1, SKIP, RIO1, RIO2,
Analog input 4 points, analog output
1 point
Add-on PCB: RX341
None
Analog output 1 point
HANDLE2ch
Analog input 4 points, analog output
1 point
31
Other interfaces
(DO is sink type)
: RX324-1
(DO is source type)
(DO is sink type)
: RX324
(DO is source type)