Table of Contents
Advertisement
h323-gateway voip bind srcaddr
Examples
The following example shows how to configure the Ethernet interface with the IP address of
192.168.100.94, and then how to configure the interface so that H.323 traffic will be transmitted using
that IP address:
Router(config)# interface ethernet0
Router(config-if)# ip address 192.168.100.94 255.255.255.0
Router(config-if)# h323-gateway voip bind srcaddr 192.168.100.94
Router(config-if)#
The following example shows how to remove the H.323 binding, so that H.323 voice traffic is
transmitted using the cable interface's IP address:
Router(config-if)# no h323-gateway voip bind srcaddr
Router(config-if)#
Related Commands
Command
h323-gateway voip h323-id
h323-gateway voip id
h323-gateway voip interface
h323-gateway voip tech-prefix Defines the technology prefix that the gateway uses to register with
Cisco Broadband Cable Command Reference Guide
6-48
Description
Defines the H.323 name that identifies this cable access router
gateway to its associated gatekeeper.
Defines the name and IP address of the gatekeeper for this gateway.
Configures the interface as an H.323 interface.
the gatekeeper.
Chapter 6
Cable CPE Commands
OL-1581-07
Advertisement
Table of Contents
