Right Hand Counterbalance Valve
Replacement
Right Hand Counterbalance Valve Removal
Note: Upon removal, all seals, o-rings and gaskets
should be replace. During installation, lightly
lubricate all seals, o-rings and gaskets with
clean petroleum jelly prior to assembly.
1. Remove the Radiator. Refer to "Radiator Removal"
on page 6/4-92.
2. Using a 7/16" socket, remove the 4 bolts and lock
washers securing the fan to the fan adapter (Fig.
1475).
Toro Wheeled CUL Service Manual
4-PAW DIESEL/HYDRAULICS
Fig. 1475
DSC-1604a
3. Remove the fan (Fig. 1476).
4. Mark the rear wheel motor hydraulic line nut and
fitting at the counterbalance valve with an F (Fig.
1477).
Fig. 1476
DSC-1606a
Fig. 1477
DSC-1895a
6/2-43