CHAIN DRIVE/HYDRAULICS
10. Tighten the 4 bolts, spacers, washers, nuts securing
the valve assembly to the upper frame (Fig. 0659).
11. Install the hydraulic lines to the auxiliary valve (Fig.
0660).
4/2-34
Fig. 0659
PICT-9980a
Fig. 0660
PICT-9981a
12. Install the hydraulic lines to the selector valve Fig.
0661).
13. Install a tie strap around the two tilt cylinder hydrau-
lic lines and the straight fitting between the auxiliary
and selector valves. Tighten and trim the excess
(Fig. 0662). This will ensure the hydraulic lines do
not come in contact with the muffler.
Toro Wheeled CUL Service Manual
Fig. 0661
PICT-9982a
Fig. 0662
PICT-9986a