Chain Drive Loader Arm; Loader Arm Replacement; Loader Arm Removal - Toro 22317 Service Manual

Loader Arm Replacement

Loader Arm Removal

1. Raise the loader arm 6" - 8" (15 - 20cm) away from
frame and position attach plate flat (horizontally)
(Fig. 0701).
2. 4-Paw machines: Remove the hood.
3. Support the attach plate with a floor jack (Fig. 0702).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/LOADER ARM
DSC-1380a
Fig. 0701
Fig. 0702 DSC-1382w
4. Using a 1/2" socket, remove the 3 bolts retaining the
3 pivot pins to the attach plate (Fig. 0703).
5. Remove the center pivot pin (Fig. 0704).
Fig. 0703 DSC-1383w
DSC-1387w
Fig. 0704
4/3-1