30. Slide the boot onto the starter solenoid terminal (Fig.
1180).
31. Install the choke cable z-bend into the choke linkage
(Fig. 1181).
Toro Wheeled CUL Service Manual
Fig. 1180
DSC-1338a
Fig. 1181
DSC-1339a
4-PAW GAS/ENGINE
32. Position the choke cable under the cable clamp (Fig.
1182).
33. Position the choke lever in the open position. Push
the choke cable toward the linkage (Fig. 1183).
Fig. 1182
DSC-1340a
Fig. 1183
DSC-4467a
5/4-21