Left Hand Counterbalance Valve
Replacement
Left Hand Counterbalance Valve Removal
Note: Upon removal, all seals, o-rings and gaskets
should be replace. During installation, lightly
lubricate all seals, o-rings and gaskets with
clean petroleum jelly prior to assembly.
1. Remove the Radiator. Refer to "Radiator Removal"
on page 6/4-92.
2. Using a 7/16" socket, remove the 4 bolts and lock
washers securing the fan to the fan adapter (Fig.
1444).
3. Remove the fan assembly (Fig. 1445).
Toro Wheeled CUL Service Manual
4-PAW DIESEL/HYDRAULICS
Fig. 1444
DSC-1604a
Fig. 1445
DSC-1606a
4. Mark the hydraulic lines on the bulkhead F and R
(Fig. 1446).
F: Front hydraulic line
5. Mark the hydraulic lines on the counterbalance valve
F and R (Fig. 1447).
F: Front hydraulic line
Fig. 1446
DSC-1785a
R: Rear hydraulic line
Fig. 1447
DSC-1787a
R: Rear hydraulic line
6/2-35