5. Lubricate the spool and carefully insert it into the
valve body (Fig. 0260).
6. Inspect the rubber boot for cracks and damage;
replace as needed. Apply grease to the ball end on
the operator assembly (Fig. 0261).
Toro Wheeled CUL Service Manual
DSCN-2430a
Fig. 0260
DSCN-2427a
Fig. 0261
ALL UNITS/GENERAL
7. Install the operator assembly onto the valve body
making sure the ball end is inserted into the hole in
the spool (Fig. 0262).
8. Install the detent for the neutral safety switch (Fig.
0263).
DSCN-2433a
Fig. 0262
DSCN-2438a
Fig. 0263
3/1-71