Toro 22317 Service Manual page 239

CHAIN DRIVE/GAS ENGINE
44. Using a 1/2" socket, remove the 2 rear bolts secur-
ing the engine mount to the main frame and discard
the bolts (Fig. 0783).
45. Place suitable lumber on the operator's stand to
receive the engine. Slide the engine out toward the
rear. Rest the back of the engine on the lumber (Fig.
0784).
4/4-10
Fig. 0783 DSC-0662a
Fig. 0784 DSC-0668a
46. Hook chains to the engine lift points (Fig. 0785).
Attach a properly rated hoist to the chains. Raise the
hoist to apply tension to the chains.
47. Carefully raise the engine out of the frame (Fig.
0786).
Toro Wheeled CUL Service Manual
Fig. 0785 DSC-0670a
Fig. 0786 DSC-0671a