Left Hand Counterbalance Valve Installation
1. Position the counterbalance valve near the frame.
Snug fit the hydraulic line nut to the bottom counter-
balance valve fitting (Fig. 1460).
2. Position the counterbalance valve into the frame.
Align the other end of the snug-fit hydraulic line to
the 4-spool valve fitting. Loosely install the hydraulic
line nut to the 4-spool valve fitting (Fig. 1461).
Toro Wheeled CUL Service Manual
4-PAW DIESEL/HYDRAULICS
Fig. 1460
DSC-1840a
Fig. 1461
DSC-1847a
3. Loosely install the hydraulic hard line nut (R) to the
fitting located on the front, bottom of the counter-
balance valve (Fig. 1462).
4. Loosely install the hydraulic hard line nut (R) to the
bulkhead fitting (R) (Fig. 1463).
Fig. 1462
DSC-1850a
Fig. 1463
DSC-1852a
6/2-39