CHAIN DRIVE/GAS ENGINE
20. Using a 15/16" wrench, remove the rear hydraulic
line from the pump fitting (Fig. 0759).
21. Cap the lines and fittings so debris does not enter
the system (Fig. 0760).
4/4-4
Fig. 0759
DSC-0607a
Fig. 0760
DSC-0609a
22. Loosen the hose clamps on the front suction hose
(Fig. 0761).
23. Slide the front suction hose off the hydraulic pump
suction fitting (Fig. 0762).
Toro Wheeled CUL Service Manual
Fig. 0761
DSC-0610a
Fig. 0762
DSC-0611a