14. Using a 1-1/8" wrench, tighten the hydraulic line
nut to the fitting located on the top surface of the
counterbalance valve (Fig. 1506).
15. Using a 1-1/8" wrench, tighten the front and rear
hydraulic line nuts to the bulkhead fittings (Fig.
1507).
Toro Wheeled CUL Service Manual
4-PAW DIESEL/HYDRAULICS
Fig. 1506
DSC-1909a
Fig. 1507
DSC-1883a
16. Using a 1-18" crow's foot wrench, tighten the hydrau-
lic line nut to the 4-spool valve fitting (Fig. 1508).
17. Using a 13/16" wrench, install the tilt cylinder
hydraulic line nut to the 4-spool valve fitting (Fig.
1509).
Fig. 1508
DSC-1905a
Fig. 1509
DSC-1903a
6/2-51