19. Remove the battery tray (Fig. 1025).
20. Place a drain pan under the location of the left
counterbalance valve.
21. Mark the hydraulic lines on the counterbalance valve
with and F and an R (Fig. 1026).
F: Front hydraulic line
Toro Wheeled CUL Service Manual
Fig. 1025
DSC-1043a
Fig. 1026
DSC-1044a
R: Rear hydraulic line
4-PAW GAS/HYDRAULICS
22. Mark the hydraulic lines connected to the bulkhead
with an F and an R (Fig. 1027).
F: Front hydraulic line
23. Using a 1-1/8" offset wrench, remove the hydraulic
line nut marked with an F from the bulkhead fitting
(Fig. 1028).
Fig. 1027
DSC-1045a
R: Rear hydraulic line
Fig. 1028
DSC-1047a
5/2-15