Toro 22317 Service Manual page 169

CHAIN DRIVE/DRIVE SYSTEM
36. Using a 3/4" socket, torque the 5 lug nuts to 50 ft-
lbs. (68 Nm) (Fig. 0534).
37. Position the chain cover to the main frame (Fig.
0535).
4/1-72
DSC-0261a
Fig. 0534
DSC-0171a
Fig. 0535
38. Using a 1/2" socket, install 2 bolts to secure the
chain cover to the main frame (Fig. 0536).
39. Check and adjust the drive chain tension. Refer to
"Checking the Drive Chain Tension" on page 4/1-54.
40. If the right wheel motor was installed, reinstall the
battery. Refer to "Battery Installation" on page 4/5-7.
40. Lower the machine.
41. Start the engine and operate the wheel motor. Check
for leaks and purge air.
42. Check hydraulic fluid for proper level and add if
required.
Toro Wheeled CUL Service Manual
DSC-0176a
Fig. 0536