Toro 22317 Service Manual page 100

13. Remove the rear wheel from the rear hub (Fig.
0280).
14. Using a 3/4" socket and wrench, loosen the 4 nuts
and bolts securing the axle retaining bracket to the
main frame (Fig. 0281).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/DRIVE SYSTEM
DSC-0122a
Fig. 0280
DSC-0125
Fig. 0281
15. Using a 1-1/4" wrench, loosen the jam nut on each
of the 2 chain tensioning bolts (Fig. 0282).
16. Using a 1-1/8" socket, loosen the 2 chain tensioning
bolts. Continue to loosen the tensioning bolts until
there is adequate slack in the chain to release the
master link (Fig. 0283).
DSC-0125a
Fig. 0282
DSC-0131a
Fig. 0283
4/1-3