4. Loosely install the hydraulic hard line nut marked R
to the counterbalance valve fitting (Fig. 1041).
5. Position the spacer in between the counterbalance
valve and the frame. Install the mounting bolt and
washer through the counterbalance valve, spacer
and frame (Fig. 1042).
Toro Wheeled CUL Service Manual
Fig. 1041
DSC-1073a
Fig. 1042
DSC-1076a
4-PAW GAS/HYDRAULICS
6. Install a washer onto the mounting bolt (Fig. 1043).
7. Using a 7/16" socket and wrench, install a nut onto
the counterbalance valve mounting bolt (Fig. 1044).
Fig. 1043
DSC-1077a
Fig. 1044
DSC-1079a
5/2-19