ALL UNITS/GENERAL
17. Mark the large pump bushing assembly with a "V" all
the way down onto the pump shaft cover (Fig. 0193).
18. Remove the large pump bushing assembly from the
pump shaft cover (Fig. 0194).
3/1-54
IMG-0231a
Fig. 0193
IMG-0232a
Fig. 0194
19. Remove the snap ring from the pump cover (Fig.
0195).
20. With the cover secured so the inside of the cover is
facing up, remove the shaft seal from the inside of
the pump cover (Fig. 0196).
Toro Wheeled CUL Service Manual
IMG-0235a
Fig. 0195
IMG-0236a
Fig. 0196