3. Using a 3/4" socket and wrench, torque the 5 bolts
and nuts to 75 ft-lbs. (102 Nm) (Fig. 0449).
4. Grease the inside of the seal (Fig. 0450).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/DRIVE SYSTEM
DSC-0312a
Fig. 0449
DSC-0317a
Fig. 0450
5. Grease the axle seal surface (Fig. 0451).
6. Install the front hub and sprocket assembly onto the
axle (Fig. 0452).
DSC-0322a
Fig. 0451
DSC-0326a
Fig. 0452
4/1-49