CHAIN DRIVE/LOADER ARM
6. Remove the RH and LH pivot pins (Fig. 0705 and
Fig. 0706).
4/3-2
Fig. 0705
DSC-1392w
Fig. 0706
DSC-1394w
7. Remove the attach plate (Fig. 0707).
8. Using a 1/2" socket, remove the bolt securing the
upper tilt cylinder pivot pin to the tilt cylinder (Fig.
0708).
Toro Wheeled CUL Service Manual
Fig. 0707
DSC-1395w
Fig. 0708
DSC-1398a