20. Apply pipe sealant to the threads on the water
temperature sensor (Fig.1711).
21. Install the water temperature sensor. Use a 9/16"
wrench to tighten (Fig. 1712).
Toro Wheeled CUL Service Manual
Fig. 1711
DSC-2455a
Fig. 1712
DSC-2457a
4-PAW DIESEL/ENGINE
22. Slide the fuel line onto the #3 injector barb. Slide the
hose clamp into position to secure (Fig. 1713).
23. Apply thread locking compound to the 2 fuel
solenoid assembly mounting bolts (Fig. 1714).
Fig. 1713
DSC-2460a
Fig. 1714
DSC-2462a
6/4-31