Toro 22317 Service Manual page 413

4-PAW DIESEL/HYDRAULICS
8. Install the hydraulic line nut to the fitting located on
the side of the auxiliary valve (Fig. 1396).
9. Install the two hydraulic lines (D & E) from the
bulkhead coupler assemblies to the auxiliary valve
(Fig. 1397).
6/2-22
Fig. 1396 DSC-3927a
Fig. 1397 DSC-3020a
10. Install the hydraulic line (F) to the t-fitting between
the auxiliary and selector valve (Fig. 1398).
11. Route the hydraulic line (F) between the two tilt
cylinder hydraulic lines (Fig. 1399).
Toro Wheeled CUL Service Manual
Fig. 1398 DSC-3021a
Fig. 1399 DSC-3025a