30. Slide the boot off the starter solenoid terminal. Using
a 13mm socket, remove the nut from the starter
solenoid terminal (Fig. 1126).
31. Remove the red battery cable from the solenoid
terminal (Fig. 1127).
Toro Wheeled CUL Service Manual
Fig. 1126
DSC-1134a
Fig. 1127
DSC-1138a
4-PAW GAS/ENGINE
32. Remove the harness wire from the solenoid terminal
(Fig. 1128).
33. Using a 15mm socket, remove the bolt and star
washer securing the ground wires to the engine
block (Fig. 1129).
Fig. 1128
DSC-1140a
Fig. 1129
DSC-1142a
5/4-7