Front Sprocket & Wheel Hub Removal - Toro 22317 Service Manual

CHAIN DRIVE/DRIVE SYSTEM
11. Position the chain cover to the main frame (Fig.
0416).
12. Using a 1/2" socket, install 2 bolts to secure the
chain cover to the main frame (Fig. 0417).
13. Check and adjust drive chain tension. Refer to
"Checking Drive Chain Tension" on page 4/1-54.
14. Lower the machine.
4/1-40
DSC-0171
Fig. 0416
DSC-0176a
Fig. 0417
Front Sprocket & Wheel Hub Removal
1. Raise the machine off the floor. Refer to "Raising the
Traction Unit" on page 3/1-1.
2. Using a 1/2" socket, remove the 2 bolts securing the
chain cover to the main frame (Fig. 0418).
3. Remove the chain cover (Fig. 0419).
Toro Wheeled CUL Service Manual
DSC-0270a
Fig. 0418
DSC-0271a
Fig. 0419