Toro 22317 Service Manual page 187

CHAIN DRIVE/HYDRAULICS
3. Install the relief valve assembly on the 4-spool valve
housing (Fig. 0600).
4. Loosely install the 3 spacers and bolts to the valve
body (Fig. 0601).
Note: The different size spacer is located at the top.
4/2-18
Fig. 0600 DSC-2786a
Fig. 0601 DSC-2802a
5. Install the 4 handles. Adjust the 2 drive handles
so they are at the same height and adjust the 2 lift
handles so they are at equal heights (Fig. 0602).
6. Tighten the jam nuts on the three levers (Fig. 0603).
Toro Wheeled CUL Service Manual
Fig. 0602 DSC-2804a
Fig. 0603 DSC-2808a