Toro 22317 Service Manual page 83

ALL UNITS/GENERAL
42. Install an o-ring into the groove in the housing
mounting flange face (Fig. 0217).
43. Making note of the markings on the housing and
mounting flange, install the pump housing over the
11 gpm pump assembly and onto the mounting
flange (Fig. 0218).
3/1-60
IMG-0267a
Fig. 0217
IMG-0269a
Fig. 0218
44. Making note of the markings, install the 5gpm pump
inner bushing (Fig. 0219).
45. Install the 5gpm pump drive gear into the pump
assembly (Fig. 0220).
Toro Wheeled CUL Service Manual
PICT-2836a
Fig. 0219
IMG-0270a
Fig. 0220