4-PAW DIESEL/DRIVE SYSTEM
26. Using a 1/1/8" wrench, remove the lower hydraulic
line from the lower wheel motor fitting (Fig. 1244).
27. Allow the fluid to drain into the pan (Fig. 1245).
6/1-6
DSC-0933a
Fig. 1244
DSC-0934a
Fig. 1245
28. Using a 1-1/16" socket, remove the 2 wheel motor
fittings (Fig. 1246).
29. Cap the lines, fittings and ports to prevent debris
from contaminating the system.
30. Support the wheel motor with a floor jack (Fig.
1247).
Toro Wheeled CUL Service Manual
DSC-0940a
Fig. 1246
DSC-0942a
Fig. 1247