Hydraulic Lift Cylinder Replacement (Old Style); Hydraulic Lift Cylinder Removal - Toro 22317 Service Manual

4-PAW DIESEL/HYDRAULICS
16. Adjust the auxiliary valve lever by pulling it back to
the handle and tighten the bolt and nut (Fig. 1404).
17. Start the unit and check for any oil leaks.
18. Allow the machine to run and purge air from the
system.
19. Turn the machine off and remove the key.
20. Check the hydraulic fluid level and add as neces-
sary.
6/2-24
Fig. 1404 DSC-3046a
Hydraulic Lift Cylinder Replacement
(Old Style)
Note: The front grill was removed for photo
purposes.
Note: Upon removal, all seals, o-rings and gaskets
should be replace. During installation, lightly
lubricate all seals, o-rings and gaskets with
clean petroleum jelly prior to assembly.

Hydraulic Lift Cylinder Removal

1. Start the unit and raise the lift arm all the way. Install
a cylinder lock on the cylinder that is not being
removed (Fig. 1405).
Toro Wheeled CUL Service Manual
Fig. 1405 IMG-0088a