3. Align the barrel end of the cylinder with the main-
frame pivot point. Insert the pivot pin (Fig. 0678).
4. Install a shoulder bolt to secure the pivot pin. Torque
the shoulder bolt to 150 - 179 in-lbs (17 - 20 Nm)
(Fig. 0679).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/HYDRAULICS
Fig. 0678
DSC-2908a
Fig. 0679
DSC-2923a
5. Install both hydraulic lines to the lift cylinder fittings.
Ensure the marked hydraulic line is attached to the
marked fitting (Fig. 0680).
Note: Use double wrenches to prevent the fittings
from spinning.
Fig. 0680
DSC-2927a
4/2-39