Toro 22317 Service Manual page 284

13. Using a 1/2" socket, remove the 4 bolts securing the
hose cover to the main frame (Fig. 0934).
14. Remove the hose cover (Fig. 0935).
Toro Wheeled CUL Service Manual
4-PAW GAS/DRIVE SYSTEM
DSC-0836a
Fig. 0934
DSC-0839a
Fig. 0935
15. Using a 1-1/2" socket, loosen, do not remove, the
patch lock nut on the rear wheel motor shaft (Fig.
0936).
Note: In 2004 there was a running change from
the castle nut and cotter pin (22312 serial
#240000200 and lower) to a patch lock nut
(22312 serial #240000201 and higher) for
retaining the wheel motors.
16. Install a wheel hub puller (TOR4096) onto the rear
wheel hub (Fig. 0937).
DSC-0843a
Fig. 0936
DSC-0844a
Fig. 0937
5/1-15