4-PAW GAS/ENGINE
56. Verify/adjust engine RPM to the following (refer to
Kohler engine service manual):
Maximum engine speed (full throttle) to 3600 ± 75 RPM.
Minimum engine speed (idle) to 1400 ± 200 RPM.
57. Install the hood.
58. Raise the loader arm all the way up to remove
pressure from the loader arm cylinder locks.
59. Remove the clevis pin and cotter pin from the loader
arm cylinder locks (Fig. 1205).
60. Remove the loader arm cylinder locks from the
cylinder rods (Fig. 1206).
5/4-28
Fig. 1205
DSC-0455a
Fig. 1206
DSC-0452a
61. Reinstall the loader arm cylinder locks onto the
hydraulic auxiliary lines (for storage) (Fig. 1207).
62. Lower the loader arms.
63. Test operate machine and operate all hydraulics to
purge air from the system. Check for leaks.
64. Turn the engine off.
Toro Wheeled CUL Service Manual
Fig. 1207
DSC-0449a