CHAIN DRIVE/ELECTRICAL
Battery Replacement
Battery Removal
1. Raise the loader arms to the fully raised position.
2. Turn off the engine and remove the key.
3. Remove the loader arm cylinder locks located on the
hydraulic auxiliary lines (Fig. 0868).
4/5-6
Fig. 0868
DSC-0448a
4. Position a loader arm cylinder lock over each lift
cylinder rod (Fig. 0869).
5. Secure each loader arm cylinder lock with a clevis
pin and hairpin cotter (Fig. 0870).
Toro Wheeled CUL Service Manual
Fig. 0869
DSC-0452a
Fig. 0870
DSC-0456a