Toro 22317 Service Manual page 424

3. Align the pivot pin through hole with the mounting
hole in the cylinder. Install a shoulder bolt to secure
the pivot pin. Torque the shoulder bolt to 150 to 170
in-lbs. (17 – 19 Nm) (Fig. 1436).
4. Install the hydraulic lines to the tilt cylinder fittings
(Fig. 1437).
Note: Use double wrenches to prevent the hose
from twisting.
Toro Wheeled CUL Service Manual
4-PAW DIESEL/HYDRAULICS
Fig. 1436 IMG-0131a
Fig. 1437 IMG-0133a
5. Lift the attach plate and align the cylinder ram to the
attach plate pivot point. Install a pivot pin (Fig. 1438).
6. Align the pivot pin through hole with the mounting
hole in the cylinder ram. Install a shoulder bolt to
secure the pivot pin. Torque the shoulder bolt to 150
to 170 in-lbs. (17 to 19 Nm) (Fig. 1439).
Fig. 1438 IMG-0134a
Fig. 1439 IMG-0136a
6/2-33