Sprocket Replacement
Sprocket Removal
1. Place the rear hub assembly in a vise (Fig. 0399).
2. Using a 3/4" socket and wrench, remove the 5 bolts
and nuts securing the sprocket to the rear hub (Fig.
0400).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/DRIVE SYSTEM
DSC-0222a
Fig. 0399
DSC-0223a
Fig. 0400
3. Remove the sprocket from the rear hub. Discard the
hub (Fig. 0401).
Note: The hub and wheel motor shaft nut must be
discarded and replaced with new.
4. Inspect the sprocket. If worn or damaged, it must be
replaced.
DSC-0226a
Fig. 0401
4/1-35