About This Manual - Toro 22317 Service Manual

This service manual was written expressly for Toro service technicians. The Toro Company has made every effort to
make the information in this manual complete and correct.
Basic shop safety knowledge and mechanical/electrical skills are assumed. The Table of Contents lists the systems
and the related topics covered in this manual.
For service information on drive systems, please refer to the Hydro-Gear BDP-10A/16A/21L Pump service manual
(form no. 492-4789), Hydro-Gear P Series Pump service manual (form no. BLN 52503) and Parker-Ross TF wheel
motor service manual (form no. 492-4753). For information specific to the engines used on this unit, refer to the
appropriate engine manufacturer's service and repair instructions.
Units covered on in this manual are: Wheeled Chain Drive compact utility loader, model years 1998 - current
The manual may also be specified for use on later model products.
The hydraulic power system is precision machinery. Maintain strict cleanliness control during all stages of service
and repair. Cover or cap all hose ends and fittings whenever they are exposed. Even a small amount of dirt or other
contamination can severely damage the system.
We are hopeful that you will find this manual a valuable addition to your service shop. If you have any questions or
comments regarding this manual, please contact us at the following address:
The Toro Company reserves the right to change product specifications or this manual without notice.

ABOUT THIS MANUAL

Wheeled 4-Paw Gas compact utility loader, model years 1999 - current
Wheeled 4-Paw Diesel compact utility loader, model years 1999 - current
The Toro Company
SWS Technical Services
8111 Lyndale Avenue South
Bloomington, MN 55420
Copyright© All Rights Reserved
©2012 The Toro Company