4-Paw Diesel Drive System; Front Wheel Motor Replacement; Front Wheel Motor Removal - Toro 22317 Service Manual

Front Wheel Motor Replacement

Front Wheel Motor Removal

1. Park CUL on a level surface.
2. Raise the loader arm 6" - 12" (15 - 30cm) off the
ground.
3. Turn off the machine and remove the key.
4. Lift the rear of the machine (Fig. 1224).
5. Position jackstands under the rear 2 corners of the
machine. Remove the floor jack (Fig. 1225).
Toro Wheeled CUL Service Manual
4-PAW DIESEL/DRIVE SYSTEM
DSC-0100a
Fig. 1224
DSC-0099a
Fig. 1225
6. Raise the front of the machine (Fig. 1226).
7. Position jackstands under the front corners of the
machine. Remove the floor jack (Fig. 1227).
DSC-3924a
Fig. 1226
DSC-0920a
Fig. 1227
6/1-1