10. Support the cylinder and remove the pivot pin from
the barrel end of the cylinder (Fig. 1414).
11. Remove the lift cylinder from the machine (Fig.
1415).
Toro Wheeled CUL Service Manual
4-PAW DIESEL/HYDRAULICS
Fig. 1414
IMG-0098a
Fig. 1415
IMG-0099a
12. Remove the two 90 degree fittings from the lift
cylinder (Fig. 1416).
13. To service the lift cylinder, refer to "100-4163
Hydraulic Cylinder Rebuild" (Old Style) for 2004 and
older units on page 3/1-17 or "105-7867 Hydraulic
Cylinder Rebuild" (New Style) for 2005 and newer
units on page 3/1-40.
Fig. 1416
IMG-0102a
6/2-27