Note: Lower the loader arms.
11. Raise the front of the machine (Fig. 1017).
12. Position jackstands under the front corners of the
machine. Remove the floor jack (Fig. 1018).
Toro Wheeled CUL Service Manual
Fig. 1017
DSC-3924a
Fig. 1018
DSC-0920a
4-PAW GAS/HYDRAULICS
13. Using a 13/16" socket, remove 5 lug nuts securing
the right rear wheel to the wheel hub (Fig. 1019).
14. Remove the wheel from the wheel hub (Fig. 1020).
Fig. 1019
DSC-1036a
Fig. 1020
DSC-1037a
5/2-13