ALL UNITS/GENERAL
30. Place the cylinder rod into a vise and install pro-
tective plastic or tape over the threads (Fig. 0092).
31. Lubricate and install the head assembly on the ram
(Fig. 0093).
3/1-26
IMG-0419a
Fig. 0092
IMG-0420a
Fig. 0093
32. Remove the protective tape/plastic from the threads.
33. Apply a small quantity of thread locking compound
(blue) to the cylinder rod threads (Fig. 0094).
34. Loosely install the piston until hand tight or fully
seated on the threads (Fig. 0095).
Toro Wheeled CUL Service Manual
IMG-0423a
Fig. 0094
IMG-0424a
Fig. 0095