4-PAW DIESEL/HYDRAULICS
10. Install the bolt assembly into the lower slot on the
counterbalance valve. Position the spacer between
the counterbalance valve and the frame (Fig. 1502).
11. Install a washer onto the mounting bolt (Fig. 1503).
6/2-50
Fig. 1502
DSC-1952a
Fig. 1503
DSC-1954a
12. Using a 7/16" socket and wrench, install a nut onto
the mounting bolt (Fig. 1504).
13. Using a 1-1/8" crow's foot wrench, tighten the front
wheel motor hydraulic line nut to the upper fitting
located on the front surface of the counterbalance
valve (Fig. 1505).
Toro Wheeled CUL Service Manual
Fig. 1504
DSC-1958a
Fig. 1505
DSC-1968a