Toro 22317 Service Manual page 267

CHAIN DRIVE/ELECTRICAL
3. Turn on the machine and raise the loader arm up to
relieve pressure from the cylinder locks.
4. Turn off the engine and remove the key.
5. Remove the clevis pin and cotter pin securing each
loader arm cylinder lock to the cylinder rod (Fig.
0875).
6. Remove the cylinder locks from the lift cylinder rods
(Fig. 0876).
4/5-8
Fig. 0875 DSC-0456a
Fig. 0876 DSC-0452a
7. Store the loader arm cylinder locks by installing them
on the hydraulic auxiliary lines (Fig. 0877).
8. Lower the loader arms.
Toro Wheeled CUL Service Manual
Fig. 0877 DSC-0448