Left Hand Counterbalance Valve Installation - Toro 22317 Service Manual

Left Hand Counterbalance Valve Assembly (Fig. 0996).
AB C D
A. Nut
B. Washer (2)
C. Spacer
Toro Wheeled CUL Service Manual
B E
Fig. 0996 DSC-1065a
D. Counterbalance Valve
E. Bolt
4-PAW GAS/HYDRAULICS

Left Hand Counterbalance Valve Installation

Note: Upon removal, all seals, o-rings and gaskets
should be replaced. During installation, lightly
lubricate all seals, o-rings and gaskets with
clean petroleum jelly prior to assembly.
1. Position the counterbalance valve inside the frame.
2. Loosely install the bottom hydraulic hard line nut
(Fig. 0997).
3. Loosely install the top hydraulic hard line nut (Fig.
0998).
Fig. 0997 DSC-1013a
Fig. 0998 DSC-1014a
5/2-7