Loader Arm Replacement
Loader Arm Removal
1. Raise the loader arm 6" - 8" (15 - 20cm) away from
frame and position attach plate flat (horizontally)
(Fig. 1056).
2. 4-Paw machines: Remove the hood.
3. Support the attach plate with a floor jack (Fig. 1057).
Toro Wheeled CUL Service Manual
DSC-1380a
Fig. 1056
Fig. 1057
DSC-1382w
4-PAW GAS/LOADER ARM
4. Using a 1/2" socket, remove the 3 bolts retaining the
3 pivot pins to the attach plate (Fig. 1058).
5. Remove the center pivot pin (Fig. 1059).
Fig. 1058
DSC-1383w
DSC-1387w
Fig. 1059
5/3-1