Right Hand Counterbalance Valve Installation - Toro 22317 Service Manual

4-PAW GAS/HYDRAULICS
33. Transfer 4 of the 6 hydraulic fittings from the old
counterbalance valve to the new counterbalance
valve (Fig. 1037).
Note: The 2 spool fittings do not get transferred.
They come with the new counterbalance
valve.
Counterbalance Valve Assembly (Fig. 1038).
A
B
A. Bolt
B. Washer (2)
C. Counterbalance valve
5/2-18
Fig. 1037 DSC-1067a
E
D
B
C
Fig. 1038 DSC-1010a
D. Spacer
E. Nut
Right Hand Counterbalance Valve
Installation
Note: Upon removal, all seals, o-rings and gaskets
should be replaced. During installation, lightly
lubricate all seals, o-rings and gaskets with
clean petroleum jelly prior to assembly.
1. Position the counterbalance valve inside the frame.
2. Loosely install the bottom hydraulic hard line nut
(Fig. 1039).
3. Loosely install the top hydraulic hard line nut (Fig.
1040).
Toro Wheeled CUL Service Manual
Fig. 1039 DSC-1070a
Fig. 1040 DSC-1072a