Toro 22317 Service Manual page 346

13. Place suitable lumber on the operator's stand.
14. Raise the hoist and position the engine onto the
lumber. Remove the chains and hoist from the
engine (Fig. 1164).
15. Slide the engine into position in the main frame so
the engine mount plate mounting holes align with the
mounting holes in the main frame (Fig. 1165).
Toro Wheeled CUL Service Manual
Fig. 1164 DSC-1247a
Fig. 1165 DSC-1250a
4-PAW GAS/ENGINE
16. Using a 1/2" socket, loosely install 4 new mounting
bolts securing the engine plate to the main frame
(Fig. 1166).
17. Torque the 4 engine plate mounting bolts to 20 - 26
ft-lbs. (27 - 35 Nm) (Fig. 1167).
Fig. 1166 DSC-1254a
Fig. 1167 DSC-1256a
5/4-17