Toro 22317 Service Manual page 39

ALL UNITS/GENERAL
12. Position a gasket over the spool. Install the actuator
lever through the hole in the spool and then up to the
valve body (Fig. 0054).
13. Install 2 Allen screws to secure the actuator lever to
the valve body (Fig. 0055).
3/1-16
IMG-0207a
Fig. 0054
IMG-0208a
Fig. 0055
14. Install a new o-ring on the plate and slide the plate
over the spool up to the valve body (Fig. 0056).
15. Install the detent assembly (Fig. 0057).
Toro Wheeled CUL Service Manual
IMG-0210a
Fig. 0056
IMG-0211a
Fig. 0057