4-PAW DIESEL/ENGINE
Glow Plug Replacement
Glow Plug Removal
1. Park the machine on a level surface.
2. Shut engine off and remove the key.
3. Allow the engine to cool.
4. Open the rear engine cover.
5. Using a 10mm socket, remove the 3 nuts securing
the power wire and glow plug bus bar to the glow
plugs (Fig. 1882).
6/4-76
Fig. 1882
6. Remove the glow plug bus bar and clean the area
around the glow plugs to prevent debris from enter-
ing the engine.
7. Use a 10mm socket to remove the glow plug(s) that
need to be replaced (Fig. 1883).
IMG-0153
Fig. 1883
Toro Wheeled CUL Service Manual
IMG-0154a