95. Clean, inspect and replace any parts of the engine
mount assembly showing evidence of wear (Fig.
1687 and Fig. 1688).
Toro Wheeled CUL Service Manual
Fig. 1687
DSC-2289a
Fig. 1688
DSC-2292a
4-PAW DIESEL/ENGINE
96. If the rubber engine mounts need to be replaced:
They are not interchangeable. They are identified by
the following:
• The rubber mounts located on the flywheel end
of the mount assembly have a blue identification
mark and has a lip underneath the flange (Fig.
1689).
• The rubber mounts located on the oil drain end of
the mount assembly have a white or green identi-
fication mark and do not have a lip underneath
the flange (Fig. 1690).
Fig. 1689
DSC-2295a
Fig. 1690
DSC-2297a
6/4-25