Loader Arm Installation - Toro 22317 Service Manual

Loader Arm Installation

1. Inspect the loader arm and pivot pins for wear or
damage. Replace as necessary (Fig. 0723).
2. Inspect the hydraulic cylinder yolks for wear or
damage. Replace as necessary (Fig. 0724).
Toro Wheeled CUL Service Manual
CHAIN DRIVE/LOADER ARM
Fig. 0723 DSC-1448a
Fig. 0724 DSC-1453a
3. Inspect the attach plate for wear or damage. Re-
place as necessary (Fig. 0725).
4. Install the loader arm onto the unit, aligning the pivot
points on the loader arm with the pivot points on the
upper frame (Fig. 0726).
Fig. 0725 DSC-1458a
Fig. 0726 DSC-1459a
4/3-7