16. Using a 1-5/16" wrench remove the nut from the
female flush face coupler (Fig. 1071) and remove
the female flush face coupler (Fig. 1072).
Toro Wheeled CUL Service Manual
Fig. 1071
DSC-1414a
Fig. 1072
DSC-1415a
4-PAW GAS/LOADER ARM
17. Remove the drain pan.
18. Using a properly rated strap or chain and hoist,
support the cross-member of the loader arm (Fig.
1073).
19. Using a 1/2" socket remove the 2 bolts securing the
lift cylinder pin to the loader arm and the loader arm
pivot pin to the frame (2 per side, left side shown)
(Fig. 1074).
Fig. 1073
DSC-1418a
DSC-1419a
Fig. 1074
5/3-5