46. Slide the front suction hose onto the front pump
fitting (Fig. 1196).
47. Position the hose clamp and use a 5/16" socket to
tighten the hose clamp securing the front suction
hose to the front pump fitting (Fig. 1197).
Toro Wheeled CUL Service Manual
Fig. 1196
DSC-1362a
Fig. 1197
DSC-1363a
4-PAW GAS/ENGINE
Note: Upon removal, all seals, o-rings and gaskets
should be replaced. During installation, lightly
lubricate all seals, o-rings and gaskets with
clean petroleum jelly prior to assembly.
48. Install the hydraulic line (marked with and R) to the
rear hydraulic pump fitting (Fig. 1198).
49. Use a 15/16" wrench to tighten the hydraulic line nut
to the fitting (Fig. 1199).
Fig. 1198
DSC-1364a
Fig. 1199
DSC-1365a
5/4-25